Because of differences in conditions (concentration, temperature, pressure etc.) and composition of chemicals / fluids the recommended colour coding green/red/blue/black are only guidlines and should not be taken as binding. For these reasons we cannot give any guarantees as to the correctness of our recommendations in individual cases.

Clean-Matic 1.25 E / 360°

Article number: 11975401 / EAN: 7611034130972
Sprühgerät Clean-Matic 1.25 E / 360° von Birchmeier für Reinigung und Desinfektion

New swing with 360° function. High quality hand compression sprayer with brass nozzle for a general and industrial use.

  • Spraying in any position (360°)
  • Impact resistant polyethylene tank with 1.25 l filling capacity, transparent
  • Recessed grips
  • Special resistant gaskets against alkaline products
  • Safety valve and lockable push-button
  • Ergonomic and efficient hand pump up to 3 bar operating pressure
  • Large filling opening
  • Fanjet nozzle made of plastic
Read more

Technical data
Chemical resistanceNot suitable for formic acid, acetic acids, sodium / potassium hydroxides. In addition stainless steel units: no hydrochlonic acid, nitric acid, sulfuric acid or hydrofluoric acid, ammonia, peroxides and other corrosive media.For use with diluted alkalines and specific acids (for example acetic acid).Not suitable for non-polar solvents, ketones, peroxides, chlorine, acids and alkalines.
Form of applicationLiquid
Filling capacity (Volume, l)1.25
Max. working pressure (bar)3
Nozzle typeFanjet nozzle TPU 8002 PP
Spray pattern
Nozzles material
Material Device/containerPlastic
Material FittingsPlastic
Fitting connectors
Stress classVery heavy duty
Length (mm)125
Width (mm)215
Height (mm)305
Weight (kg)0.43
Device typeHand sprayer
Special functionSpray function 360° (spraying in any position)Gaskets EPDMSuitable for disinfection
Nozzles data
Element for fanjet nozzle TPU 8002 PP greyElement for fanjet nozzle TPU 8002 PP greyTechnical parametersSpray patternPressure range2 – 25 barFlow rate l/minDroplet size depending on pressure
Pressure (bar)12345678910
To the nozzle
Adjustable nozzle assy. brass niAdjustable nozzle assy. brass niTechnical parametersSpray patternAdjustable nozzlePressure range – 0 barTo the nozzle
Foam nozzle G3/8"Foam nozzle G3/8Technical parametersSpray patternPressure range – barTo the nozzle
Element for fanjet nozzle XR 8002 VS yellowElement for fanjet nozzle XR 8002 VS yellowTechnical parametersSpray patternFanjet nozzlePressure range1 – 25 barSpray angle80°Flow rate l/minDroplet size depending on pressure
Pressure (bar)12345678910
To the nozzle
Choose video or document
Post a comment

Tell us what you think about Clean-Matic 1.25 E / 360°!

No comments yet