Important:
Because of differences in conditions (concentration, temperature, pressure etc.) and composition of chemicals / fluids the recommended colour coding green/red/blue/black are only guidlines and should not be taken as binding. For these reasons we cannot give any guarantees as to the correctness of our recommendations in individual cases.
Back

Profi Star 3

Article number: 11831001 / EAN: 7611034011196
Profi Star 3

Flexible allrounder for professional pest control applications

  • Plastic pressure tank with additional plasting tank base
  • Filling volume of 3 litres (tank volume 5.5 litres)
  • Chemical resistant FPM (Viton) gaskets
  • 4 bar operating pressure
  • Large filling opening with integrated filling funnel
  • Spiral hose or a flexible handling
  • Adjustable brass nozzle
  • Safety and relief valve
  • Compressed air valve for pressurisation
Read more

Technical data
Chemical resistanceFor use with the most plant protection products.Not suitable for formic acid, acetic acids, sodium / potassium hydroxides. In addition stainless steel units: no hydrochlonic acid, nitric acid, sulfuric acid or hydrofluoric acid, ammonia, peroxides and other corrosive media.Not suitable for mineral oil based and vegetable oils, hypochlorites, limonenes, terpenes.For use with mineral oil based and vegetable solvents and oils.
ApplicationPesticide
Water
Biological agents
Mineraloil based solvent
Plant protection
Herbicides
Form of applicationLiquid
Filling capacity (Volume, l)3
Max. working pressure (bar)4
Nozzle typeAdjustable nozzle 1.3 mm
Spray patternAdjustable nozzle
Nozzles materialBrass
Material Device/containerPlastic
Material FittingsPlastic, brass
Fitting connectorsscrew fitting
Stress classVery heavy duty
Length (mm)182
Width (mm)182
Height (mm)430
Device typeCompression sprayer plastic
Special functionGaskets Viton
Nozzles data
Adjustable nozzle 1.3 mm G1/4”Adjustable nozzle 1.3 mm G1/4”Technical parametersSpray patternAdjustable nozzlePressure range1 – 10 barFlow rate l/minDroplet size depending on pressure
Pressure (bar)12345678910
Spraying
To the nozzle
Herbicide Floodjet nozzle 1.6 mm, blueHerbicide Floodjet nozzle 1.6 mm, blueTechnical parametersSpray patternFanjet nozzlePressure range0.5 – 2 barFlow rate l/minbarTo the nozzle
Fanjet nozzle TP 8002 Ms, G1/4"iFanjet nozzle TP 8002 Ms, G1/4Technical parametersSpray patternFanjet nozzlePressure range1 – 25 barSpray angle80°Flow rate l/minbarDroplet size depending on pressure
Pressure (bar)12345678910
Spraying
To the nozzle
Duro mist nozzle 1.65 mmDuro mist nozzle 1.65 mmTechnical parametersSpray patternHollow cone nozzlePressure range1 – 25 barSpray angle90°Flow rate l/minbarDroplet size depending on pressure
Pressure (bar)12345678910
Spraying
To the nozzle
Videos

No videos available.

DownloadsLeaflet

No instructions available.

Post a comment

Tell us what you think about Profi Star 3!

No comments yet