Important:
Because of differences in conditions (concentration, temperature, pressure etc.) and composition of chemicals / fluids the recommended colour coding green/red/blue/black are only guidlines and should not be taken as binding. For these reasons we cannot give any guarantees as to the correctness of our recommendations in individual cases.
Back

Spray-Matic 20 S with reducing valve

Article number: 11648201 / EAN: 7611034122281
Spray-Matic 20 S with reducing valve

Stainless steel compression sprayer with reducing valve

  • Tank made of stainless steel, filling capacity 20 litres
  • Operating pressure 6 bar
  • Chemical resistant Viton gaskets
  • Security valve
  • Separate, large filling opening
  • Filler cap with reducing valve
  • Hose coupling fixed on container head
  • Compressed air valve
  • Pressure gauge
  • Piston valve assembly with integrated fine filter
  • Robust piston valve assembly made of polypropylene and stainless steel
  • CE conform
Read more

Technical data
ApplicationWater
Impregnation
Formwork release oil / Release agents
Antirust
Mineraloil based solvent
Form of applicationLiquid
Filling capacity (Volume, l)20
Max. working pressure (bar)6
Nozzle typeAdjustable nozzle 1.3 mm
Spray patternAdjustable nozzle
Nozzles materialBrass
Material Device/containerStainless steel
Material FittingsBrass vni, brass
Fitting connectorsscrew fitting
Stress classVery heavy duty
Length (mm)240
Width (mm)240
Height (mm)890
Weight (kg)7.5
Device typeCompression sprayer stainless steel
Special functionGaskets Viton
Nozzles data
Adjustable nozzle 1.3 mm G1/4”Adjustable nozzle 1.3 mm G1/4”Technical parametersSpray patternAdjustable nozzlePressure range1 – 1 barFlow rate l/minTo the nozzle
Fanjet nozzle G1/4"i, TP 8002 MsFanjet nozzle G1/4"i, TP 8002 MsTechnical parametersSpray patternFanjet nozzlePressure range1 – 25 barSpray angle80°Flow rate l/minbarDroplet size depending on pressure
Pressure (bar)12345678910
Spraying
To the nozzle
Herbicide Floodjet nozzle 1.6 mm, blueHerbicide Floodjet nozzle 1.6 mm, blueTechnical parametersSpray patternFanjet nozzlePressure range – 2 barTo the nozzle
Duro mist nozzle 0.8 mmDuro mist nozzle 0.8 mmTechnical parametersSpray patternHollow cone nozzlePressure range1 – 25 barSpray angle50°Flow rate l/minbarTo the nozzle
Duro mist nozzle 1.0 mmDuro mist nozzle 1.0 mmTechnical parametersSpray patternHollow cone nozzlePressure range1 – 25 barSpray angle60°Flow rate l/minbarTo the nozzle
Duro mist nozzle 1.3 mmDuro mist nozzle 1.3 mmTechnical parametersSpray patternHollow cone nozzlePressure range1 – 25 barSpray angle75°Flow rate l/minbarTo the nozzle
Duro mist nozzle 1.5 mmDuro mist nozzle 1.5 mmTechnical parametersSpray patternHollow cone nozzlePressure range1 – 25 barSpray angle80°Flow rate l/minbarTo the nozzle
Duro mist nozzle 1.65 mmDuro mist nozzle 1.65 mmTechnical parametersSpray patternHollow cone nozzlePressure range1 – 25 barSpray angle90°Flow rate l/minbarTo the nozzle
Videos

No videos available.

DownloadsLeaflet
Choose video or document
Post a comment

Tell us what you think about Spray-Matic 20 S with reducing valve!

No comments yet