Important:
Because of differences in conditions (concentration, temperature, pressure etc.) and composition of chemicals / fluids the recommended colour coding green/red/blue/black are only guidlines and should not be taken as binding. For these reasons we cannot give any guarantees as to the correctness of our recommendations in individual cases.
Back

Spray-Matic 5 P

Article number: 11816201 / EAN: 7611034011202
Spray-Matic 5 P
  • Application Spray-Matic 5 P

Top quality compression sprayer with metal parts made of brass for general and industrial use

  • Impact resistant Polyethylene tank with 5 litres filling capacity, transparent with litre and US gal. scale
  • Chemical resistant Viton gaskets 4 bar operating pressure and 2.5 litres pressure space
  • Safety valve
  • Ergonomic and powerful pump with stainless steel pump rod and sleeve guidance
  • Compressed air connection valve
  • Brass fanjet nozzle
  • Large filling opening with integrated funnel
  • 50 cm curved, brass lance and 1.5 m reinforced pressure hose
  • CE conform
Read more

Technical data
ApplicationWater
Impregnation
Formwork release oil / Release agents
Antirust
Dissolution of wallpaper
Mineraloil based solvent
Form of applicationLiquid
Filling capacity (Volume, l)5
Max. working pressure (bar)4
Nozzle typeFanjet nozzle TP 8002 brass
Spray patternFanjet nozzle
Nozzles materialBrass
Material Device/containerPlastic
Material FittingsPlastic, brass
Fitting connectorsscrew fitting
Stress classVery heavy duty
Length (mm)185
Width (mm)185
Height (mm)550
Weight (kg)3.1
Device typeCompression sprayer plastic
Special functionGaskets Viton
Nozzles data
Fanjet nozzle G1/4"i, TP 8002 MsFanjet nozzle G1/4"i, TP 8002 MsTechnical parametersSpray patternFanjet nozzlePressure range1 – 1 barFlow rate l/minbarDroplet size depending on pressure
Pressure (bar)12345678910
Spraying
To the nozzle
Herbicide Floodjet nozzle 1.6 mm, blueHerbicide Floodjet nozzle 1.6 mm, blueTechnical parametersSpray patternFanjet nozzlePressure range – 2 barTo the nozzle
Duro mist nozzle 0.8 mmDuro mist nozzle 0.8 mmTechnical parametersSpray patternHollow cone nozzlePressure range1 – 25 barSpray angle50°Flow rate l/minbarTo the nozzle
Duro mist nozzle 1.0 mmDuro mist nozzle 1.0 mmTechnical parametersSpray patternHollow cone nozzlePressure range1 – 25 barSpray angle60°Flow rate l/minbarTo the nozzle
Duro mist nozzle 1.3 mmDuro mist nozzle 1.3 mmTechnical parametersSpray patternHollow cone nozzlePressure range1 – 25 barSpray angle75°Flow rate l/minbarTo the nozzle
Duro mist nozzle 1.5 mmDuro mist nozzle 1.5 mmTechnical parametersSpray patternHollow cone nozzlePressure range1 – 25 barSpray angle80°Flow rate l/minbarTo the nozzle
Duro mist nozzle 1.65 mmDuro mist nozzle 1.65 mmTechnical parametersSpray patternHollow cone nozzlePressure range1 – 25 barSpray angle90°Flow rate l/minbarTo the nozzle
Adjustable nozzle 1.3 mm G1/4”Adjustable nozzle 1.3 mm G1/4”Technical parametersSpray patternAdjustable nozzlePressure range1 – 10 barFlow rate l/minbarTo the nozzle
Videos

No videos available.

DownloadsLeaflet
Choose video or document
Post a comment

Tell us what you think about Spray-Matic 5 P!

No comments yet