Important:
Because of differences in conditions (concentration, temperature, pressure etc.) and composition of chemicals / fluids the recommended colour coding green/red/blue/black are only guidlines and should not be taken as binding. For these reasons we cannot give any guarantees as to the correctness of our recommendations in individual cases.
Back

Spray-Matic 20 SH

Article number: 11648204 / EAN: 7611034122311
Spray-Matic 20 SH

Stainless steel compression sprayer

  • Tank made of stainless steel, filling capacity 20 litres
  • Operating pressure 6 bar
  • Chemical resistant Viton gaskets
  • Security valve
  • Separate, large filling opening
  • Hose coupling fixed on container head
  • Compressed air valve
  • Pressure gauge
  • Piston valve assembly with integrated fine filter
  • Robust piston valve assembly made of polypropylene and stainless steel
  • CE conform
Read more

Technical data
Chemical resistanceFor use with diluted acids, weak alkalis, hypochlochrites.Not suitable for mineral oil based and vegetable oils, hypochlorites, limonenes, terpenes.Not suitable for non-polar solvents, ketones, peroxides, chlorine, acids and alkalines.
ApplicationWater
Impregnation
Acids
Formwork release oil / Release agents
Disinfection
Form of applicationLiquid
Filling capacity (Volume, l)20
Max. working pressure (bar)6
Nozzle typeFanjet nozzle TPU 8002 PP
Spray patternFanjet nozzle
Nozzles materialPlastic, plastic / stainless steel
Material Device/containerStainless steel
Material FittingsPlastic, stainless steel
Fitting connectorsscrew fitting
Stress classVery heavy duty
Length (mm)240
Width (mm)240
Height (mm)890
Weight (kg)7.6
Device typeCompression sprayer stainless steel
Special functionGaskets Viton
Nozzles data
Fanjet nozzle assy. PP Viton TPU 8002 PPFanjet nozzle assy. PP Viton TPU 8002 PPTechnical parametersSpray patternFanjet nozzlePressure range1 – 25 barFlow rate l/minbarDroplet size depending on pressure
Pressure (bar)12345678910
Spraying
To the nozzle
Fanjet nozzle TP 8002 Ms, G1/4"iFanjet nozzle TP 8002 Ms, G1/4Technical parametersSpray patternFanjet nozzlePressure range1 – 25 barSpray angle80°Flow rate l/minbarDroplet size depending on pressure
Pressure (bar)12345678910
Spraying
To the nozzle
Adjustable nozzle 1.3 mm, G1/4“ brass niAdjustable nozzle 1.3 mm, G1/4“ brass niTechnical parametersSpray patternAdjustable nozzlePressure range1 – 25 barFlow rate l/minbarTo the nozzle
Videos

No videos available.

DownloadsLeaflet
Choose video or document
Post a comment

Tell us what you think about Spray-Matic 20 SH!

No comments yet