Important:
Because of differences in conditions (concentration, temperature, pressure etc.) and composition of chemicals / fluids the recommended colour coding green/red/blue/black are only guidlines and should not be taken as binding. For these reasons we cannot give any guarantees as to the correctness of our recommendations in individual cases.
Back

Spray-Matic 5 P, with PR 3

Article number: 11816201 / EAN: 7611034011202
Spray-Matic 5 P
  • 5 Liter Sprühgerät Spray-Matic 5 P mit Viton-Dichtung von Birchmeier für Schalöl, Schalungen, Baustelle

Top quality compression sprayer with metal parts made of brass for general and industrial use

  • Adjustable pressure control valve PR 3 P1 (1-3 bar)
  • Impact resistant Polyethylene tank with 5 litres filling capacity, transparent with litre and US gal. scale
  • Chemical resistant Viton gaskets 4 bar operating pressure and 2.5 litres pressure space
  • Safety valve
  • Ergonomic and powerful pump with stainless steel pump rod and sleeve guidance
  • Compressed air connection valve
  • Brass fanjet nozzle
  • Large filling opening with integrated funnel
  • 50 cm curved, brass lance and 1.5 m reinforced pressure hose
  • CE conform
Read more

Technical data
Chemical resistanceNot suitable for formic acid, acetic acids, sodium / potassium hydroxides. In addition stainless steel units: no hydrochlonic acid, nitric acid, sulfuric acid or hydrofluoric acid, ammonia, peroxides and other corrosive media.Not suitable for mineral oil based and vegetable oils, hypochlorites, limonenes, terpenes.For use with mineral oil based and vegetable solvents and oils.
ApplicationWater
Antirust
Impregnation
Mineraloil based solvent
Formwork release oil / Release agents
Dissolution of wallpaper
Form of applicationLiquid
Filling capacity (Volume, l)5
Max. working pressure (bar)4
Nozzle typeFanjet nozzle TP 8002 brass
Spray patternFanjet nozzle
Nozzles materialBrass
Material Device/containerPlastic
Material FittingsPlastic, brass
Fitting connectorsscrew fitting
Stress classVery heavy duty
Length (mm)185
Width (mm)185
Height (mm)550
Weight (kg)3.1
Device typeCompression sprayer plastic
Special functionGaskets VitonAdjustable pressure control valve
Nozzles data
Duro mist nozzle 0.8 mm, G1/4" (Accessories)Duro mist nozzle 0.8 mm, G1/4Technical parametersSpray patternHollow cone nozzle (for smaller shrubs and plants)Pressure range1 – 25 barSpray angle50°Flow rate l/minDroplet size depending on pressure
Pressure (bar)12345678910
Spraying
To the nozzle
Duro mist nozzle 1.0 mm, G1/4" (Accessories)Duro mist nozzle 1.0 mm, G1/4Technical parametersSpray patternHollow cone nozzle (for smaller shrubs and plants)Pressure range1 – 25 barSpray angle60°Flow rate l/minDroplet size depending on pressure
Pressure (bar)12345678910
Spraying
To the nozzle
Duro mist nozzle 1.3 mm, G1/4" (Accessories)Duro mist nozzle 1.3 mm, G1/4Technical parametersSpray patternHollow cone nozzle (for smaller shrubs and plants)Pressure range1 – 25 barSpray angle75°Flow rate l/minDroplet size depending on pressure
Pressure (bar)12345678910
Spraying
To the nozzle
Duro mist nozzle 1.5 mm, G1/4" (Accessories)Duro mist nozzle 1.5 mm, G1/4" (Accessories)Technical parametersSpray patternHollow cone nozzle (for smaller shrubs and plants)Pressure range1 – 25 barSpray angle80°Flow rate l/minDroplet size depending on pressure
Pressure (bar)12345678910
Spraying
To the nozzle
Duro mist nozzle 1.65 mm, G1/4" (Accessories)Duro mist nozzle 1.65 mm, G1/4Technical parametersSpray patternHollow cone nozzle (for smaller shrubs and plants)Pressure range1 – 25 barSpray angle90°Flow rate l/minDroplet size depending on pressure
Pressure (bar)12345678910
Spraying
To the nozzle
Adjustable nozzle 1.3 mm G1/4” (Accessories)Adjustable nozzle 1.3 mm G1/4” (Accessories)Technical parametersSpray patternAdjustable nozzle (adjustable from spraying to jet)Pressure range1 – 10 barFlow rate l/minbarDroplet size depending on pressure
Pressure (bar)12345678910
Spraying
To the nozzle
Herbicide Floodjet nozzle 1.6 mm, blue (Accessories)Herbicide Floodjet nozzle 1.6 mm, blue  (Accessories)Technical parametersSpray patternPressure range – barFlow rate l/minTo the nozzle
Videos

No videos available.

DownloadsLeafletThe correct colour for your application
Safety regulationsSafety regulations
Choose video or document
Post a comment

Tell us what you think about Spray-Matic 5 P, with PR 3!

No comments yet