Important:
Because of differences in conditions (concentration, temperature, pressure etc.) and composition of chemicals / fluids the recommended colour coding green/red/blue/black are only guidlines and should not be taken as binding. For these reasons we cannot give any guarantees as to the correctness of our recommendations in individual cases.
Back

e-Spray 7 P (CAS with battery pack, with charger)

Article number: 12186001 / EAN: 7611034056081
e-Spray 7 P (CAS with battery pack, with charger)

Top battery compression sprayer with high-performance compressor and brass fi ttings for universal and industrial use.

  • Battery compressor TLK 35 with CAS battery pack (Cordless Alliance System)
  • 18 V Li-Ion power / 2.0 Ah, with up to 200 min / 70 l operating time at 2.0 bar
  • Continuous spraying without manual pumping
  • Plastic container with 7.0 l capacity
  • Vertical and horizontal spray tube holder
  • Stable base
  • Operating pressure adjustable from 0.5 – 3.5 bar for optimal spray pattern
  • Chemical resistant Viton gaskets
  • Fanjet nozzle made of brass
  • Compressor mount
  • Quick-change system for battery pack
  • Charger SC 36
  • Pressure relief valve and integrated filling funnel
  • Filling scale in liters and gallons
  • Kink-resistant hose
  • High nozzle quality for best spraying effect
  • Not for spraying pesticides
Read more

Technical data
Chemical resistanceNot suitable for formic acid, sodium / potassium hydroxides. In addition stainless steel units: no hydrochlonic acid, nitric acid, sulfuric acid or hydrofluoric acid, ammonia, peroxides and other corrosive media.Not suitable for mineral oil based and vegetable oils, hypochlorites, limonenes, terpenes.For use with mineral oil based and vegetable solvents and oils.
ApplicationWater
Antirust
Impregnation
Mineraloil based solvent
Formwork release oil / Release agents
Dissolution of wallpaper
Form of applicationLiquid
Filling capacity (Volume, l)7
Max. working pressure (bar)3.5
Nozzle typeFanjet nozzle TP 8002 brass
Spray patternFanjet nozzle
Nozzles materialBrass
Material Device/containerPlastic
Material FittingsPlastic, brass
Fitting connectorsscrew fitting
Stress classVery heavy duty
Length (mm)250
Width (mm)300
Height (mm)680
Weight (kg)4.3
Device typeBattery sprayer
Special functionGaskets VitonElectronic pressure regulation
Nozzles data
Fanjet nozzle G1/4"i, TP 8002 MsFanjet nozzle G1/4Technical parametersSpray patternFanjet nozzle (for surfaces, lawns, plates)Pressure range1 – 25 barFlow rate l/minDroplet size depending on pressure
Pressure (bar)12345678910
Spraying
To the nozzle
Videos

No videos available.

Downloads

No downloads available.

No instructions available.

Post a comment

Tell us what you think about e-Spray 7 P (CAS with battery pack, with charger)!

No comments yet